Design and Development of Mupirocin Nanofibers as Medicated Textiles for Treatment of Wound Infection in Secondary Burns
DOI:
https://doi.org/10.37285/ijpsn.2021.14.6.4Abstract
The present study assessed the topical potential of nanofibers loaded with Mupirocin (MUP) for the treatment of burns. Nanofibers of MUP were composed of Polyvinyl Pyrrolidone (PVP), Gelatin Type-A, and Ethanol using two methods: Solvent casting and Electrospinning. Nanofibers were characterized for Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), Differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA), Drug Content Studies, in-vitro drug permeation, antibacterial and stability studies. The FT-IR studies showed that the Electrospinning technique had a very good mixing of MUP with the polymer. SEM studies showed that the morphology of electrospinning nanofibers had diameters in the range of 70.41 nm- 406.83 nm. The thermal decomposition studies of optimized Nanofiber (E.S.1) were performed by DSC and TGA study and it was found that the formulation had high stability in high-temperature environments. Permeation studies showed that E.S.1 had the highest percentage amount and controlled release of the drug (90 %) up to 8 has compared to other formulations. Nanofibers prepared through the Electrospinning technique showed better antibacterial activity against Staphylococcus aureus as compared to the Solvent casting nanofibers. This research suggested that MUP loaded nanofibers can be potentially used as a topical drug delivery system for the treatment of burns.
Downloads
Metrics
Keywords:
Topical drug delivery, Burns, Nanofibers, MUP, Solvent casting method, Electrospinning method
Downloads
Published
How to Cite
Issue
Section
References
Abdallah M (2013). Transferosomes as a transdermal drug delivery system for enhancement the antifungal activity of nyastatin. Int J Pharm Pharm Sci 5: 560-7.
Ayaz HG, Perets A, Ayaz H, Gilroy KD, Govindaraj M, Brookstein D and Lelkes PI (2014). Textile-templated electrospun anisotropic scaffolds for regenerative cardiac tissue engineering. Biomaterials 35(30): 8540-52.
https://doi.org/10.1016/j.biomaterials.2014.06.029
Bana A, Sathe MA and Rajput SJ (2019). Analytical Method Development And Validation For Simultaneous Estimation Of Halobetasol Propionate And MUP In The Ratio 1: 40 By Uv Spectroscopy And Rp-Hplc Method. International Journal of Pharmaceutical Sciences and Research 10(3): 1392-1401. http://dx.doi.org/10.13040/IJPSR.0975-8232.10(3).1392-01
Boukari Y, Scurr DJ, Qutachi O, Morris AP, Doughty SW, Rahman CV and Billa N (2015). Physicomechanical properties of sintered scaffolds formed from porous and protein-loaded poly (DL-lactic-co-glycolic acid) microspheres for potential use in bone tissue engineering. Journal of Biomaterials Science, Polymer Edition 26(12): 796-811. https://doi.org/10.1080/09205063.2015.1058696
Burns Fact sheet N°365". WHO. April 2014. Archived from the original on 10 November 2015. Retrieved 3 March 2016.
Burns". World Health Organization. September 2016. Archived from the original on 21 July 2017. Retrieved 1 August 2017.
Ceri H, Olson ME, Stremick C, Read RR, Morck D and Buret A (1999). The Calgary Biofilm Device: new technology for rapid determination of antibiotic susceptibilities of bacterial biofilms. Journal of Clinical Microbiology 37(6): 1771-6.
https://doi.org/10.1128/JCM.37.6.1771-1776.1999
Chen X, Yang HH, Huangfu YC, Wang WK, Liu Y, Ni YX and Han LZ (2012). Molecular epidemiologic analysis of Staphylococcus aureus isolated from four burn centers. Burns 38(5): 738-42. https://doi.org/10.1016/j.burns.2011.12.023
Church D, Elsayed S, Reid O, Winston B and Lindsay R (2006). Burn wound infections. Clinical Microbiology Reviews 19(2): 403-34. https://doi.org/10.1128/CMR.19.2.403-434.2006
Costerton JW, Stewart PS and Greenberg EP (1999). Bacterial biofilms: a common cause of persistent infections. Science 284(5418): 1318-22.
https://doi.org/10.1126/science.284.5418.1318
de Beer D, Stoodley P and Lewandowski Z (1994). Liquid flow in heterogeneous biofilms. Biotechnology and Bioengineering 44(5): 636-41. https://doi.org/10.1002/bit.260440510
E. C. Smoot, J. O. Kucan, D. R. Graham and J. E. Barenfanger (1992). Susceptibility testing of topical antimicrobials against methicillin-resistant Staphylococcus aureus. Journal of Burn Care & Research 13(2): 198–202.
Edwards R, Harding KG (2004) Bacteria and wound healing. Current Opinion in Infectious Diseases 17(2): 91-6.
https://doi.org/10.1097/01.qco.0000124361.27345.d4
Erol S, Altoparlak U, Akcay MN, Celebi F, Parlak M (2004) Changes of microbial flora and wound colonization in burned patients. Burns 30(4): 357-61. https://doi.org/10.1016/j.burns.2003.12.013
Indian Pharmacopoeia 7th edition volume-II. The Indian Pharmacopoeia Commission, Ghaziabad, 2014.
Jackson DM (1953). The diagnosis of the depth of burning. British journal of surgery 40(164): 588-96.
https://doi.org/10.1002/bjs.18004016413
Jin G, Prabhakaran MP, Kai D, Annamalai SK, Arunachalam KD and Ramakrishna S (2013). Tissue engineered plant extracts as nanofibrous wound dressing. Biomaterials 34(3): 724-34. https://doi.org/10.1016/j.biomaterials.2012.10.026
Kamlesh Dutt Tripathi, 7th edition. Essentials of Medical Pharmacology. Jaypee Brothers Medical Publishers (P) Ltd, 2013.
Khil MS, Cha DI, Kim HY, Kim IS and Bhattarai N (2003). Electrospun nanofibrous polyurethane membrane as wound dressing. Journal of Biomedical Materials Research Part B: Applied Biomaterials: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials 67(2): 675-9. https://doi.org/10.1002/jbm.b.10058
Li L, Zheng X, Fan D, Yu S, Wu D, Fan C, Cui W and Ruan H (2016) Release of celecoxib from a bi-layer biomimetic tendon sheath to prevent tissue adhesion. Materials Science and Engineering: C 61: 220-6. https://doi.org/10.1016/j.msec.2015.12.028
Ma PX (2004) Scaffolds for tissue fabrication. Materials today 7(5): 30-40. https://doi.org/10.1016/S1369-7021(04)00233-0
Ma PX, Zhang R (1999). Synthetic nano‐scale fibrous extracellular matrix. Journal of Biomedical Materials Research: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials 46(1): 60-72. https://doi.org/10.1002/(SICI)1097-4636(199907)46: 1<60::AID-JBM7>3.0.CO;2-H
Martínez-Pérez CA, Olivas-Armendariz I, Castro-Carmona JS and García-Casillas PE (2011) Scaffolds for tissue engineering via thermally induced phase separation. Advances in Regenerative Medicine: InTech 21: 275-94.
Nguyen DT, Orgill DP and Murphy GF (2009). The pathophysiologic basis for wound healing and cutaneous regeneration. InBiomaterials for treating skin loss (pp. 25-57). Woodhead Publishing. https://doi.org/10.1533/9781845695545.1.25
Quirós J, Borges JP, Boltes K, Rodea-Palomares I and Rosal R (2015). Antimicrobial electrospun silver-, copper-and zinc-doped polyvinylpyrrolidone nanofibers. Journal of hazardous materials 299: 298-305. https://doi.org/10.1016/j.jhazmat.2015.06.028
Rode H, Hanslo D, De Wet PM, Millar AJ and Cywes S (1989). Efficacy of MUP in methicillin-resistant Staphylococcus aureus burn wound infection. Antimicrobial agents and chemotherapy 33(8): 1358-61. https://doi.org/10.1128/AAC.33.8.1358
Sarbatly R, Krishnaiah D and Kamin Z (2016). A review of polymer nanofibres by electrospinning and their application in oil–water separation for cleaning up marine oil spills. Marine pollution bulletin 106(1-2): 8-16.
https://doi.org/10.1016/j.marpolbul.2016.03.037
Sarwa KK, Mazumder B, Rudrapal M and Verma VK (2015). Potential of capsaicin-loaded transfersomes in arthritic rats. Drug delivery 22(5): 638-46.
https://doi.org/10.3109/10717544.2013.871601
Shupp JW, Nasabzadeh TJ, Rosenthal DS, Jordan MH, Fidler P and Jeng JC (2010) A review of the local pathophysiologic bases of burn wound progression. Journal of burn care & research 31(6): 849-73. https://doi.org/10.1097/BCR.0b013e3181f93571
Stadelmann WK, Digenis AG and Tobin GR (1998). Physiology and healing dynamics of chronic cutaneous wounds. The American Journal of Surgery 176(2): 26S-38S.
https://doi.org/10.1016/S0002-9610(98)00183-4
Stefanides Sr MM, Copeland CE, Kominos SD and Yee RB (1976). In vitro penetration of topical antiseptics through eschar of burn patients. Annals of Surgery 183(4): 358.
https://doi.org/10.1097/00000658-197604000-00005
Tintinalli, Judith. “Emergency Medicine: A Comprehensive Study Guide (Emergency Medicine (Tintinalli)).” New York: McGraw-Hill Companies 2010:1374–1386.
Vasita R and Katti DS (2006) Nanofibers and their applications in tissue engineering. International Journal of nanomedicine 1(1): 15. https://doi.org/10.2147/nano.2006.1.1.15
Velasco Barraza RD, Álvarez Suarez AS, Villarreal Gómez LJ, Paz González JA, Iglesias AL and Vera Graziano R (2016). Designing a low-cost electrospinning device for practical learning in a bioengineering biomaterials course. Revistamexicana de ingenieríabiomédica 37(1): 7-16.
https://doi.org/10.17488/RMIB.37.1.1
Villarreal-Gómez LJ, Cornejo-Bravo JM, Vera-Graziano R and Grande D (2016). Electrospinning as a powerful technique for biomedical applications: a critically selected survey. Journal of Biomaterials Science, Polymer Edition 27(2): 157-76. https://doi.org/10.1080/09205063.2015.1116885
Vizcaino-Alcaide MJ, Herruzo-Cabrera R and Rey-Calero J (1993). Efficacy of a broad-spectrum antibiotic (MUP) in an in vitro model of infected skin. Burns 19(5): 392-5. https://doi.org/10.1016/0305-4179(93)90059-H
Zahmatkeshan M, Adel M, Bahrami S, Esmaeili F, Rezayat SM, Saeedi Y, Mehravi B, Jameie SB and Ashtari K (2018). Polymer based nanofibers: preparation, fabrication, and applications. Handbook of nanofibers. 1-47.
